Remapping the APC40

by Dirk Bigler Wed Jul 08, 2009 7:11 pm

Some good ideas here.

by wyxeboy Sun Oct 25, 2009 9:28 am

Does anyone know how they have set up the track control in such a way.
I have tried remapping it but it wont let me set up a bass cut on every channel (1- Cool

by wyxeboy Sun Oct 25, 2009 7:36 pm

alright iVE SUSSED IT OUT NOW...EASIER THAN I THOUGHT

by Dirk Bigler Mon Oct 26, 2009 8:12 am

Do you want to share mate? I had the same problem that it did change, for example bass, so that when I pressed one it would let me control the bass for 8 channels, but then it wouldnt let me do anything for the other buttons?

by wyxeboy Mon Oct 26, 2009 8:53 am

What i did was use the master channel effect from this template http://www.vimeo.com/6993740 (good template)

You put this master channel on every track then hit the midi key and mapped all bass on the pan track then the hi pass as bank A on all tracks, etc, etc

You dont need the send and return tracks though.

Hope this makes sense and I hope I've understood your question properly?

I'll try and upload my template if you r still struggling

Thanks

by Grant Carlisle Wed Jan 06, 2010 4:44 am

wyxeboy wrote:What i did was use the master channel effect from this template http://www.vimeo.com/6993740 (good template)

You put this master channel on every track then hit the midi key and mapped all bass on the pan track then the hi pass as bank A on all tracks, etc, etc

You dont need the send and return tracks though.

Hope this makes sense and I hope I've understood your question properly?

I'll try and upload my template if you r still struggling

Thanks

Had absolutly no problem remaping the kills. Now remapping the activator to show the clip view of what playing is another story. Everytime i try this it just wants to make the track play from start. any ideas?